Safety Mining Lamp

• Usage: Camping, Mining, Emergency Lighting, Hiking
• Irradiation Distance: 50-100m
• Feature: Waterproof, Shock-resistant, Anti-fog
• Lighting Time (Hours): >12
• Certification: CE, RoHS
• Trademark: NO
• Model NO.: KL8M(H)
• Origin: China
• HS Code: 8513109000
• Production Capacity: 50000/Month

Product Description

Battery capacity	8.8AH,lithium cell
Led brand	CREE-XPE 3w
Current	350mA
Dischargint time	26 hours
Lux	10000LUX
Net weight	lamp :520g; charging : 146g

KL8LM(F) Miner's Lamp

User manual
Please read it carefully before using!

Standard: GB7957-2003
Summarization
1. Application and characteristic
KL8LM  is special illuminating lamp for
workers carrying individually under mine.
This series is our new self-designed generation product. It adopts Li-ion battery, cree-LED
double light sources, with smart size and light weight, free maintenance battery, and long life
LED.
2.Working conditions
Temperature: 0-40ºC
3. Specs and signification
     K   L   8   L   M  ( )
                              Design serial No.
                              Free of maintenance
                              LED light source
                              Rated capacity (Ah)
                              Li-ion battery
                              Mining safety lamp

4. Standard
GB 7597-2003 General Requirement for Miner's Lamp Safety
MT 242-2004 KL Series Miner's Lamp
Q/JY 069-2006 KL Series Miner's Lamp

5. Explosion-proof type: Exs I
Structure
1. This series lamp is portable, the lamp head and battery part are connected by cable's upper
cover to be a whole miner's lamp. Lamp head could be fixed on cap lamp.
2. A LED main light source is installed in, KL8LM(A), several LED auxiliary light sources.
Clockwise turn on switch, main source and auxiliary sources illuminate alternatively.
3. This battery case is designed with closed wear-ring, convenient for carrying.
4. This lamp head is designed with charging device, matching with charging set, convenient
and reliable for charging.
5. PTC self-protection is set between battery group, and reusable short circuit protective
device is set on cable's battery end. Thus, this is very safe and reliable.
Technical Parameter
FORM1
No.    Rated
capacity
(Ah)    Rated
voltage
(V)    Lighting
time    LED main light source parameter    Life of
service    Valid
storage
period    Weight
(g)
                Voltage
(V)    Current
(A)    Luminance(lx)            
                        Lighting
start    Lighting
24h            
1    8.8    3.6    ≥28    3.6    0.35    8800    8500    900    half a
year    660
Usage and maintenance
1. The battery is charged with more than 1/4 power when shipped out of factory, turn on the
switch to make sure it can illuminate normally. If it was in good condition, charge and use it.
Follow the charging set user manual, connect to power supply, plug lamp head into charging
socket, clockwise turn 180 degree to make charging points contact well, watch whether the
indicator is normal. It will take 10 hours to be charged fully.
2. Charge with matched charging set or unit charger.
3. Please turn off lamp when charging.
4. If any damage happened in using, give it to check department after leaving mine well, and
maintain by professional person with special tool, don't open lamp yourself, especially under
mine.
5. Don't over discharge lamp, use it in stipulated time, otherwise, battery's capacity and life
of service would be reduced.
6. If lamp head happened short circuit in maintenance or other operation, disposal the faulty,
and restart the lamp, it will work normally.
7. If the lamp was not used usually, please charge per three months in storage period.
8. Don't acutely knock or collide lamp in carrying or using, to avoid damage to any parts to
affect normal warning.


Fault analysis and elimination
KL LM Miner's Lamp Fault Analysis and Elimination
Fault performance    Reason analysis    Eliminate method    Remarks
lamp no light    1.cable broken
2.points contact bad
3.weld bad
4.protective device invalidates
5.loop broken or weld split off
caused by acute shake
6.battery fault
7.LED damaged by acute
shake or wrong usage
8.constant current driving
board or any parts damaged by
acute shake    1.change a new one
2.make points contact well
3.reweld
4.change by our company's
after-sale worker
5.reweld
6.discard
7.change a new LED
8.change driving board    In stipulated
using period,
if damage
caused by
unartificial
reason, and
met with
discarding,
our company
can replace it
for you.
hipment and storage
1. No acute impact, insolation and rain, don't inverse the package, roll or heavily press it.
2. Store in dry, clean, ventilate warehouse with temperature 0-40ºC, and there is no sulfid or
such corrosive elements. Storage period is half a year, if more than this period, battery
capacity and life of service would be affected
Unpacking and check
1. Please make sure whether the package is good, user manual, certificate and accessories are
complete.
2. Check whether lamp appearance is ok.
3. The battery is charged with more than 1/4 power when shipped out of factory, turn on the
switch to make sure it can illuminate normally. If it was in good condition, charge and use it.
Notices
1. Don't use lamp lack of any parts under mine.
2. Maintaining and charging must be on land.
3. Don't change structure or any parts arbitrarily, or change any parts' parameter and specs in
maintenance.
4. Don't use lamp in other purpose, as smoking, firecrackers, etc.
5. Don't close to or throw in fire.
6. If fault happened, maintain it once left mine well, don't take fault lamp to well.
7. Centrally manage discarded lamps, and recycle them by professional unit or miner's lamp
factory.