LED Ore Mining Lamp

• Customization: Available
• Usage: Camping, Mining, Emergency Lighting, Hiking
• Irradiation Distance: 50-100m
• Model NO.: LED ORE CAP
• Feature: Waterproof, Shock-resistant, Anti-fog
• Lighting Time (Hours): >12
• Certification: CE, RoHS
• Trademark: NO
• Origin: China
• HS Code: 8513109000
• Production Capacity: 50000/Month

Product Description

User manual
Please read it carefully before using!
Standard: GB7957-2003
Summarization
1. Application and characteristic
KL2.8LM is special illuminating lamp for
workers carrying individually under mine.
This series is our new self-designed generation product. It adopts Li-ion battery, LED
double light sources, with smart size and light weight, free maintenance battery, and long life
LED.
2.Working conditions
Temperature: 0-40ºC

4. Standard
GB 7597-2003 General Requirement for Miner's Lamp Safety
MT 242-2004 KL Series Miner's Lamp
Q/JY 069-2006 KL Series Miner's Lamp
5. Explosion-proof type: Exs I
Structure
1. This series lamp is portable, the lamp head and battery part are connected by cable's upper
cover to be a whole miner's lamp. Lamp head could be fixed on cap lamp.
2. A LED main light source is installed in, KL2.8LM, several LED auxiliary light sources.
Clockwise turn on switch, main source and auxiliary sources illuminate alternatively.
3. This battery case is designed with closed wear-ring, convenient for carrying.
4. This lamp head is designed with charging device, matching with charging set, convenient
and reliable for charging.
5. PTC self-protection is set between battery group, and reusable short circuit protective
device is set on cable's battery end. Thus, this is very safe and reliable.
Technical Parameter
FORM1

No.	Rated capacity (Ah)	Rated voltage (V)	Lighting time	LED main light source parameter				Life of service	Valid storage period	Weight (g)
				Voltage (V)	Current (A)	Luminance(lx)
						Lighting start	Lighting 11h
1	2.8	3.6	≥15	3.6	0.15	3500	3300	600	half a year	360

Usage and maintenance
1. The battery is charged with more than 1/4 power when shipped out of factory, turn on the
switch to make sure it can illuminate normally. If it was in good condition, charge and use it.
Follow the charging set user manual, connect to power supply, plug lamp head into charging
socket, clockwise turn 180 degree to make charging points contact well, watch whether the
indicator is normal. It will take 10 hours to be charged fully.
2. Charge with matched charging set or unit charger.
3. Please turn off lamp when charging.
4. If any damage happened in using, give it to check department after leaving mine well, and
maintain by professional person with special tool, don't open lamp yourself, especially under
mine.
5. Don't over discharge lamp, use it in stipulated time, otherwise, battery's capacity and life
of service would be reduced.
6. If lamp head happened short circuit in maintenance or other operation, disposal the faulty,
and restart the lamp, it will work normally.
7. If the lamp was not used usually, please charge per three months in storage period.
8. Don't acutely knock or collide lamp in carrying or using, to avoid damage to any parts to
affect normal warning.



Fault analysis and elimination
KLLM Miner's Lamp Fault Analysis and Elimination

Fault performance	Reason analysis	Eliminate method	Remarks
lamp no light	1.cable broken 2.points contact bad 3.weld bad 4.protective device invalidates 5.loop broken or weld split off caused by acute shake 6.battery fault 7.LED damaged by acute shake or wrong usage 8.constant current driving board or any parts damaged by acute shake	1.change a new one 2.make points contact well 3.reweld 4.change by our company's after-sale worker 5.reweld 6.discard 7.change a new LED 8.change driving board	In stipulated using period, if damage caused by unartificial reason, and met with discarding, our company can replace it for you.

hipment and storage
1. No acute impact, insolation and rain, don't inverse the package, roll or heavily press it.
2. Store in dry, clean, ventilate warehouse with temperature 0-40ºC, and there is no sulfid or
such corrosive elements. Storage period is half a year, if more than this period, battery
capacity and life of service would be affected
Unpacking and check
1. Please make sure whether the package is good, user manual, certificate and accessories are
complete.
2. Check whether lamp appearance is ok.
3. The battery is charged with more than 1/4 power when shipped out of factory, turn on the
switch to make sure it can illuminate normally. If it was in good condition, charge and use it.
Notices
1. Don't use lamp lack of any parts under mine.
2. Maintaining and charging must be on land.
3. Don't change structure or any parts arbitrarily, or change any parts' parameter and specs in
maintenance.
4. Don't use lamp in other purpose, as smoking, firecrackers, etc.
5. Don't close to or throw in fire.
6. If fault happened, maintain it once left mine well, don't take fault lamp to well.
7. Centrally manage discarded lamps, and recycle them by professional unit or miner's lamp
factory.